Formwork and Shuttering for Your Concrete Projects

Concrete is the most commonly used material for any kind of construction work whether big or small. It has amazing properties that make it suitable for all categories of construction projects. Concrete is put into specially designed moulds known as formworks and when it solidifies the formwork is removed and the concrete stands at a place where it is put. This process is referred to as shuttering of formwork.

Formwork can make use of both permanent and temporary moulds. These moulds hold the concrete in shape. Once the required strength is achieved then the mould is either kept or removed so that it can be reused without any hassle later on.

Requirements for Good Formwork

Although several materials are used for formwork, the following are general performance features that are required to handle the requirement of concrete construction:

1. The capability of bearing up both live and dead loads.
2. Retaining the shape with enough props as well as braces.
3. Joints need to be completely leak-proof so that the structure stays intact
4. In case the formwork can be removed, the procedure should not spoil the concrete.
5. Material that can be reused.
6. Light in weight.
7. The material of the formwork material should not distort or warp.

When choosing the type of formwork it is vital to bear in mind the type of concrete and what is the pouring temperature. Both of these have an impact on the pressure that is exerted. Also, formwork should be able to withstand loads of wet as well as dry concrete. If pressure is too much, it can lead to the structure getting spoilt.

Formwork needs structures like poles as well as stabilizers to preclude any kind of movement in course of the construction process. These are known as falsework. In order to make sure that high quality is maintained while working with the concrete, a highly qualified and intelligent workforce is needed. The construction process necessitates adequate supervision and caution.

NovaForm Work offers technically advanced products for construction. We analyze the formwork requirement of every project and present a solution accordingly. The highly experienced and competent teams at NovaForm Work come up with affordable and superb solutions for the clients. 

Concrete Slab Formwork Systems – Quality Info

When the suspended concrete slabs are constructed and aren’t bolstered by ground, there is a need for slab formwork. The slab formwork encompasses stringers, shores, formwork panels, joists, and other types of supporting materials. These enable the concrete to be put and set at a height above the ground.

The molds in which the cement is put are called form works. They are used to construct walls, bars, pillars, and any types of surfaces like buildings, pools, etc. Formworks assist the fast and convenient construction of any structure. And it is due to formworks that other construction techniques have become outmoded. Most construction firms use formworks to construct various structures as this helps in saving labor and transportation costs.

Mentioned below are various variants of formwork

Nova Formworks has three key formwork variants. These products adhere to different requirements of the clients:

• Nova Plasform– This type of formwork has panels that are made out of plastic. It is light in weight and thus facilitates faster installation.
• Nova Alplas– This is made of a blend of aluminum and plastic. It is commonly used for making towers as it is very durable.
• Nova Alform– Made of aluminum, it is durable as well as lightweight. You can use it for big construction projects.

These formworks have various end uses such as column formworks, wall formwork, slab formwork, ore-designed culverts, etc. They can be used interchangeably across mediums. Owing to their modular design, and sustainability, they are used by various businesses in their construction projects. 

Benefits of slab formwork

• Can Be Put Without Hassle– Slab formworks can be put on top of one another. This facilitates effective space use. They are hard-wearing andthus can even be storedoutdoors.

• Multiple Tie-rods Openings– Several openings enable drilling of slabs easily so that the surface not only stays clean but is also durable.

• No need for shuttering Oil – The concrete does not stick to the formworks. So no shuttering oil is required for building different structures.

• Easy to Use– The slab Formworks has an outstanding interlocking system. This enables the structure to endure huge pressure.

• Commercially Viable – Quality is not an issue and this makes these slabs commercially a very good option.

Nova Formwork is a leading name in the construction industry. We offer outstanding state of art products to cater to the diverse needs of the clients.

Box Culvert- Uses & Advantages

Located under a railway or a tunnel, Culvert is a tunnel that encompasses a stream or a small rivulet of water. It acts as a bridge and ensures the passage of traffic. It is typically put in areas where there is a natural flow of water and serves the purpose of the flow controller.

Culverts are available in various shapes such as elliptical, round, flat bottomed, box-like, and pear-shaped. They are categorized based on several factors such as roadway height, hydraulic, upstream elevation, etc.

Mentioned below are various kinds of culverts:

1. Box culvert (single or multiple)
2. Pipe culvert (single or multiple)
3. Arch culvert
4. Pipe-Arch culvert (single or multiple)
5. Bridge culvert
6. Metal box culvert

Concrete particularly Reinforced Concrete (RCC) is used to make box culverts. These are the most commonly used types of culverts. The toughest part in making a box culvert is that a totally dry surface is required to install the box culvert. So, if the base is not firm, it becomes very hard to set it up.

The precast concrete box culverts are used in place of circular concrete pipes. They drain very huge amounts of water, can easily handle the flow of water more than the regular pipes, and provide superior strength. The installation of box culverts is easier and more convenient as compared to other kinds of culverts. It is possible to make box culverts in advance and whenever the time comes, just put it at the place where the culvert is needed. 

Use of Box Culverts
Advantages of Box Culvert
Use of Box Culverts

Box Culverts are used for drainage purposes. They are also used to make tunnels and used for storage as well as material handling. Some culverts act as bridges. They easily accommodate both pedestrian and vehicular traffic. We can choose the kind of culvert in accordance with our specific needs. With precast box culverts, factors such as rain, site condition, temperature, etc do not matter.

Advantages of Box Culvert

Box Culverts are very cost-effective as:

• The box culvert has a firm frame structure.
• The construction of the box culvert is very simple
• It is ideal for non-perennial streams where there is lesser significance of scrub depth and the soil is not very strong.
• The bottom slab of the box culvert puts less pressure on soil.
• Box culverts are affordable because of their rigidity as well as monolithic action.

Nova Formworks offers products that offer a new dimension to the 21^st century constructional universe. We offer state-of-the-art products to cater to the diverse construction needs of the clients. The culverts are designed in a way to meet or even exceed the required load capacity. Both pre cast and cast in situ boxculverts can be made using nova formworks